Publications – Engineering
Ceramics
1985–1989
|
|
|
| 1989 |
| 89-1kk |
Swan A H,
Olsson E, Linde K M and Lundberg R, "The influence
of Microstructure on the Mechanical Properties of SiC
Whisker Reinforced Si3N4", in
Proceedings of the 5th SSMS Conference on New Materials
& Processes, Copenhagen, 1989. |
| 89-2kk |
Falk L K L,
Hermansson T, Rundgren K, "Microstructure of
Hot-Pressed Si3N4-ZrO2
(Y2O3) Composites", J. Mater.
Sci. Letters, 1032-1034 (1989). |
| 89-3kk |
Bostedt E,
Persson M and Carlsson R, "Colloidal Processing
Through Surface Modification", pp. 1.140-1.144 in
Euro-Ceramics, Vol. 1 "Processing of
Ceramics", ed. by G. de With, R.A. Terpstra and R.
Metselaar, Elsevier, 1989. |
| 89-4kk |
Holmström
M, Chartier T, Besson J-L and Boch P, "Influence of
ZrO2 on the Preparation and Properties of
Tape-Cast, Laminated, ZrO2-Mullite
Composites", pp. 1.299-1303 in Euro-Ceramics, Vol.
1 "Processing of Ceramics", ed. by G. de With,
R.A. Terpstra and R. Metselaar, Elsevier, 1989. |
| 89-5kk |
Falk L K L
and Holmström M, "Microstructural Development
During Processing of a Si3N4/ZrO2
Material", pp. 1.373-1.377 in Euro-Ceramics, Vol. 1
"Processing of Ceramics", ed. by G. de With,
R.A. Terpstra and R. Metselaar, Elsevier, 1989. |
| 89-6kk |
Brown I W
M, Pompe R and Carlsson R, "Preparation of Sialons
by the NPS Technique", pp. 1.484-1.488 in
Euro-Ceramics, Vol. 1 "Processing of
Ceramics", ed. by G. de With, R.A. Terpstra and R.
Metselaar, Elsevier, 1989. |
| 89-7kk |
Rundgren K,
Pompe R, Carlsson R, Kishi K and Umebayashi S, "On
the Reaction Mechanism and Mechanical Properties of
Nitrided Pressureless Sintered (NPS) Si3N4-ZrO2(+Y2O3)
Composite Ceramics", pp. 1.489-1.493 in
Euro-Ceramics, Vol. 1 "Processing of
Ceramics", ed. by G. de With, R.A. Terpstra and R.
Metselaar, Elsevier, 1989. |
| 89-8kk |
Linde K M, Persson M, Pompe R,
Karlsson S and Carlsson R, "Iterative Strength
Development of Slip Cast Si3N4",
pp. 3.126-3.130 in Euro-Ceramics, Vol. 3
"Engineering Ceramics", ed. by G. de With,
R.A. Terpstra and R. Metselaar, Elsevier, 1989.
|
| 89-9kk |
Nyberg B,
Carlström E, Persson M and Carlsson R, "Uniform
Distribution of a Pressing Aid", pp. 573-580 in
Proceedings of the 2nd International Conference on
Ceramic Powder Processing Science, ed. by H. Hausner,
G.L. Messing and S. Hirano, Deutsche Keramische
Gesellschaft, 1989. |
| 89-10kk |
Lindqvist K, Carlström E and
Carlsson R, "Low Pressure Injection Molding of
Alumina", pp. 589-597 in Proceedings of the 2nd
International Conference on Ceramic Powder Processing
Science, ed. by H. Hausner, G.L. Messing and S. Hirano,
Deutsche Keramische Gesellschaft, 1989. |
| 89-11kk |
Carlsson R,
"The Shaping of Engineering Ceramics",
Materials & Design, 10 [1] 10-14 (1989). |
| 89-12kk |
Carlström
E, Persson M, Bostedt E, Kristoffersson A and Carlsson
R, "Slip Casting and Sintering of Silicon
Carbide", pp. 175-185 in Ceramic Transactions, Vol.
2 "Silicon Carbide '87", American Ceramic
Society, 1989. |
| 89-13kk |
Lindqvist
K, Carlström E, Persson M and Carlsson R, "Organic
Silanes and Titanates as Processing Additives for
Injection Moulding of Ceramics", J. Am. Ceram.
Soc., 72 [1] 99-103 (1989). |
| 89-14kk |
Lundberg R
and Goursat P, "Silicon Carbo-Nitride Ceramic
Matrix Composites by Polymer Pyrolysis", pp. 93-98
in Proceedings of the Third European Conference on
Composite Materials, "Developments in the Science
and Technology of Composite Materials", ECCM-3, ed.
by A.R. Bunsell, P. Lamicq and A. Massiah, Elsevier,
1989. |
| 89-15kk |
Carlsson R,
"Keramer som pansarmaterial", Militär Teknisk
Tidskrift, 58 [1] 19-25 (1989). |
| 89-16kk |
Bostedt E,
"Metallalkoxider - en litteraturstudie",
KeramRapport 89-1, SCI (1989). |
| 89-17kk |
Bostedt E
och Persson M, "Ytmodifiering av keramiska
material", KeramRapport 89-2, SCI (1989). |
| 89-18kk |
Brandt J
och Persson M, "Utvärdering av moderna
tryckgjutningsmetoder för formning av
konstruktionskeramer - en förstudie",
Keram-Rapport 89-3, SCI (1989). |
| 89-19kk |
Sjögren G,
"Föroreningars form och roll vid framställning av
Si3N4-baserade
konstruktionskeramer", KeramRapport 89-4, SCI
(1989). |
| 89-20kk |
Kahlman L,
"Metoder och utrustning för bearbetning och
mekanisk testning av konstruktionskeramer",
KeramRapport 89-6, SCI (1989). |
| 89-21kk |
Persson M and Aksay I A,
"Adsorption and Stabilization of Alumina in Water
by High Molecular Weight Polyacrylic Acid"; in M.
Persson's Ph. D. Thesis, "Slip Casting and
Pressing of Ceramics based on Colloidal Processing
Techniques", Chalmers University of Technology, Göteborg
(1989). |
| 89-22kk |
Carlsson R, Garvare T, Karlsson L och
Warren R, "Fogning Keram-Metall", förstudie
inom STU:s insatsområde
"Konstruktionskeramer", 9 sidor (1989). |
| 89-23kk |
Carlström
E, "Konstruktionskeramer", kurskompendium, 44
sidor (1989). |
| 89-24kk |
Lundberg R,
"Fibre Reinforced Ceramic Composites", Ph. D.
Thesis, Chalmers University of Technology, Göteborg
(1989). |
| 89-25kk |
Persson M,
"Slip Casting and Pressing of Ceramics based on
Colloidal Processing Techniques", Ph. D. Thesis,
Chalmers University of Technology, Göteborg (1989). |
| 89-26kk |
Carlström
E, "Defect Minimisation in Silicon Carbide, Silicon
Nitride and Alumina Ceramics", Ph. D. Thesis,
Chalmers University of Technology, Göteborg (1989). |
|
| 1988 |
| 88-1kk |
Lundberg R,
Nyberg B, Williander K, Persson M, Carlsson R,
"Glass Encapsulated HIPing of SiC Whisker
Reinforced Ceramic Composites", pp. 323-327 in
Proceedings of the First International Conference HIP,
Luleå, ed. by T. Garvare, Centek Publ., 1988. |
| 88-2kk |
Lundberg R,
Pompe R, Carlsson R, "HIPed Carbon Fiber Reinforced
Silicon Nitride Composites", Ceram. Eng. Sci.
Proc., 9 [7-8] 901-906 (1988). |
| 88-3kk |
Carlström
E, Sjöstedt M, Mattsson B and Hermansson L,
"Binder Removal from Injection Moulded Ceramic
Turbocharger Rotors", pp. 199-204 in Science of
Ceramics, Vol. 14, ed. by D. Taylor, The Institute of
Ceramics, 1988. |
| 88-4kk |
Sjöberg J,
Rundgren K, Osten-Sacken J, Pompe R and Larsson B,
"Nitridation of Silica with Ammonia: Some Important
Features", pp 205-210 in Science of Ceramics, Vol.
14, ed. by D. Taylor, The Institure of Ceramics, 1988. |
| 88-5kk |
Tjernlund A
K, Pompe R, Holmström M, and Carlsson R,
"Sintering and Phase Studies in the System Si3N4-ZrO2-Al2O3",
pp. 1015-1021 in Advances in Ceramics, Vol. 24B
"Science and Technology of Zirconia III", ed.
by S. Somiya, N. Yamamoto and H. Hanagida, American
Ceramic Society, 1988. |
| 88-6kk |
Rundgren K,
Elfving P, Pompe R, Lagerlöf P and Larsson B,
"Comparative Study of Sol-Gel Prepared Mullite and
Mullite-ZrO2 Composites with and without Y2O3",
pp. 1043-1052 in Advances in Ceramics, Vol. 24B
"Science and Technology of Zirconia III", ed.
by S. Somiya, N. Yamamoto and H. Hanagida, American
Ceramic Society, 1988. |
| 88-7kk |
Ekberg I-L,
Lundberg R, Warren R and Carlsson R, "Indentation
Testing of SiC-Whisker Reinforced Al2O3
Composites", in Brittle Matrix Composites-II,
Elsevier, 1988. |
| 88-8kk |
Lundberg
R, "Fiberförstärkta keramer", Jernkontorets
Forskning D627, 8061/87 (1988). |
| 88-9kk |
Carlsson
R, "Finns någon kunskap om keramiska
material", IVA-rapport 338: Nya material i
produktionen: Företagens strategi för införande av ny
teknik, p. 113-120 (1988). |
| 88-10kk |
Carlsson
R, Adlerborn J, Dahlberg R, Lindberg J, Mellgard I och
Regestad G, "Kerampansar", förstudie inom
STU:s insatsområde "Konstruktionskeramer", 16
sidor (1988). |
| 88-11kk |
Carlström
E, "Reserapport från forskarvistelse i Japan vid
GIRI Nagoya 23 sept - 23 okt '87", SILIKAT-RAPPORT
88-4 (1988). |
| 88-12kk |
Rundgren
K, Elfving P, Kishi K, Umebayashi S and Pompe R:
"Hot-Pressed Si3N4-ZrO2
Composites: Effect of Different ZrO2 and Y2O3
Additions on the Mechanical Properties", in Kent
Rundgren's Ph.D. Thesis "Preparation and Evaluation
of Zirconia-Toughened Mullite and Silicon Nitride
Ceramics", University of Göteborg, 1988. |
|
| 1987 |
| 87-1kk |
Carlsson R,
"The Shaping of Structural Engineering
Ceramics", Inst. Phys. Conference Series No. 89:
Workshop Session, p. 23-31 (1987). |
| 87-2kk |
Carlsson R
and Lundberg R, "Fiber and Whisker Reinforcement of
Ceramic Matrix Composites", pp. 49 - 61 in
Proceedings of the International Symposium on Fine
Ceramics Arita '87, 1987. |
| 87-3kk |
Lundberg R,
Pompe R and Carlsson R, "Silicon Carbide Fibre
Reinforced Nitrided Silicon Nitride Composites" ,
pp. 2.33-2.39 in Proceedings of the International
Conference, ICCM-6 & ECCM-2, Vol. 2, Elsevier, 1987. |
| 87-4kk |
Lundberg R,
Nyberg B, Williander K, Persson M and Carlsson R,
"Processing of Whisker-Reinforced Ceramics",
Composites, 18 [2] 125-127 (1987). |
| 87-5kk |
Lundberg R,
Kahlman L, Pompe R, Carlsson R and Warren R, "SiC-
Whisker-Reinforced Si3N4
Composites", Am. Ceram. Soc. Bull., 66 [2] 330-333
(1987). |
| 87-6kk |
O'Meara C,
Dunlop G and Pompe R, "Phase Relationships in the
System SiO2-Y2O3-Al2O3",
pp. 265-270 in Materials Science Monographs, Vol. 38A
"High Tech Ceramics", ed. by P. Vincenzini,
Elsevier, 1987. |
| 87-7kk |
Sjöberg J,
Rundgren K, Pompe R and Larsson B, "Preparation of
Si2N2O-Based Sintered Bodies from
Powders Made by Nitridation of Amorphous Silica in
Ammonia", pp. 535-543 in Materials Science
Monographs, Vol. 38A "High Tech Ceramics", ed.
by P. Vincenzini, Elsevier, 1987. |
| 87-8kk |
Persson M,
Forsgren A, Carlström E, Käll L, Kronberg B, Pompe R
and Carlsson R, "Steric Stabilization of Silicon
Carbide Slips", pp. 623-632 in Materials Science
Monographs, Vol. 38A "High Tech Ceramics", ed.
by P. Vincenzini, Elsevier, 1987. |
| 87-9kk |
Bostedt E,
Persson M och Carlström E, "Homogen fördelning av
sintringshjälpmedel i en Si3N4-matris",
SILIKAT-RAPPORT 87-1 (1987). |
| 87-10kk |
Persson M,
"Forskarvistelse i Japan hösten 1986",
SILIKAT-RAPPORT 87-6 (1987). |
| 87-11kk |
Pompe R m
fl, "Utveckling av konstruktionskeramer:
Slutrapport för åren 1984-87", SILIKAT-RAPPORT
87-7 (1987). |
| 87-12kk |
Nilsson I-L
och Lundberg R, "Orientering om mätmetoder för
brottseghetsbestämning hos whiskerförstärkt keramik.
Utvärdering av intrycksmetoder", SILIKAT-RAPPORT
87-8 (1987). |
| 87-13kk |
Pompe R,
"Sätt vid framställning av keramiska kompositer
innehållande kiseloxynitrid och zirkoniumoxid", SE
8702268-7 (Svenskt Patent 1989). |
| 87-14kk |
Karlsson S
och Eklund L, "Bestämning av porstorlek, SKS
kurskompendium "Moderna kontrollmetoder i keramisk
industri", 14 sidor (1987). |
| 87-15kk |
Carlström
E, "Bestämning av brottmekaniska egenskaper",
SKS kurskompendium "Moderna kontrollmetoder i
keramisk industri", 15 sidor (1987). |
| 87-16kk |
Carlström
E, "Datorn som hjälpmedel vid analyser och
testning", SKS kurskompendium "Moderna
kontrollmetoder i keramisk industri", 9 sidor
(1987). |
| 87-17kk |
Persson M.
"Bestämning av partikelstorlek och specifik
yta", SKS kurskompendium "Moderna
kontrollmetoder i keramisk industri", 9 sidor
(1987). |
| 87-18kk |
Pompe R,
"Termisk analys (DTA/TGA)", SKS
kurskompendium, "Moderna kontrollmetoder i keramisk
industri", 21 sidor (1987). |
| 87-19kk |
Carlsson R,
"Analyser med röntgendiffraktion", SKS
kurskompendium "Moderna kontrollmetoder i keramisk
industri", 19 sidor (1987). |
|
| 1986 |
| 86-1kk |
Lundberg R,
Kahlman L, Warren R, Pompe R and Carlsson R,
"Fibre-Matrix Compatibility in Silicon Nitride
Composites", pp. 185-194 in Brittle Matrix
Composites - 1, ed. by A.M. Brandt and I.H. Marshall,
Elsevier, 1986. |
| 86-2kk |
Nyberg B,
Falk L K L, Pompe R and Carlsson R, "Some Features
of Nitrided Pressureless Sintered (NPS) Silicon Nitride
Materials Made by Modified Preparation Routes", pp.
155-163 in Proceedings of the 2nd International
Symposium on Ceramic Materials & Components for
Engines, ed. by W. Bunk and H. Hausner, Deutsche
Keramische Gesellschaft, 1986. |
| 86-3kk |
Hermansson
L, Eklund L, Askengren L and Carlsson R, "On the
Microstructure of Plasma-Sprayed Chromium Oxide",
pp. C1-165-169 in Science of Ceramics, Vol. 13, J. de
Physique, Colloque C1, Suppl. 2, Tome 47, ed. by P.
Odier, F. Cabannes and B. Cales, Les Editions de
Physique, 1986. |
| 86-4kk |
Rundgren K
and Pompe R, "On the Mechanism of Silicon
Nitridation in the Presence of ZrO2",
pp. C1-515-519 in Science of Ceramics, Vol. 13, J. de
Physique, Colloque C1, Suppl. 2, Tome 47, ed. by P.
Odier, F. Cabannes and B. Cales, Les Editions de
Physique, 1986. |
| 86-5kk |
Tjernlund
A-K, Hermansson L, Carlsson R and Axelsson K-O,
"Influence of Combustion Atmospheres on the Phase
Transformation of Zirconia", J. Mtrl. Sci. Letters,
5, 129-131 (1986). |
| 86-6kk |
Forsgren A,
Persson M och Carlström E, "Sterisk stabilisering
av SiC-gjutslammor", SILIKAT-RAPPORT 86-1 (1986). |
| 86-7kk |
Holmström
M och Tjernlund A-K, "Sintringsförsök och
fasanalys i systemet Si3N4-ZrO2",
SILIKAT-RAPPORT 86-2 (1986). |
| 86-8kk |
Nyberg, B,
"Pressning av keramiska pulver - en
litteraturstudie", SILIKAT-RAPPORT 86-6 (1986). |
| 86-9kk |
Brönnestam
M och Pompe R, "Jämförelse av Si3N4-pulver
med avseende på morfologi, föroreningar och
ytladdning", SILIKAT-RAPPORT 86-8 (1986). |
| 86-10kk |
Lundberg R,
"Forskarvistelse på GIRI Nagoya, Japan 1986",
SILIKATRAPPORT 86-9 (1986). |
| 86-11kk |
Carlström
E, "Material- och komponentprovning samt
fraktografi på polykristallina keramer",
STF-IU-kompendium "Keramer i mekaniska
konstruktioner" (1986). |
| 86-12kk |
Carlsson R,
"Nya tillverkningsprocesser",
STF-IU-kompendium "Keramer i mekaniska
konstruktioner" (1986). |
| 86-13kk |
Carlsson R,
"Fogning keram till keram - sammanfattning",
kompendium, Sundsvalls Materialdagar 1986. |
| 86-14kk |
Persson M,
"Förfaringssätt för ytmodifiering av oxidiska
och icke-oxidiska keramiska råmaterial", SE
8603074-9 (Svenskt Patent 1988). |
|
| 1985 |
| 85-1kk |
Falk L K L,
Pompe R and Dunlop G L, "Development of
Microstructure During the Fabrication of Si3N4
by Nitridation and Pressureless Sintering of Si:Si3N4
Compacts", J. Mtrl. Sci., 20, 3545-3556 (1985). |
| 85-2kk |
Tjernlund A
K, Pompe R and Carlsson R, "On the Influence of
Atmosphere on the Phase Reactions Involving the System
Si3N4-ZrO2," pp.
29-34 in British Ceramic Proceedings, No. 37
"Special Ceramics 8", ed. by S.P. Howlett and
D. Taylor, The Institute of Ceramics, 1985. |
| 85-3kk |
Lundberg R,
Dahlborg A, Jennfors P and Carlsson R, "Slip Cast
Carbon Fibre Reinforced Silicon Nitride
Composites", pp. 469-474 in Proceedings of the 1st
European Conference on Composite Materials
"Developments in the Science and Technology of
Composite Materials", ed. by A.R. Bunsell, P.
Lamicq and A. Massiah, A.E.M.C, Bordeaux 1985. |
| 85-4kk |
Pompe R,
Hermansson L, Johansson R, Djurle E and Hatcher M E,
"Characterization of Silicon Powders for the
Production of Si3N4", Mat.
Sci. Eng., 71, 355-362 (1985). |
| 85-5kk |
Falk L K L,
Dunlop G L and Pompe R, "The Microstructure of Si3N4
Formed by Nitridation and Pressureless Sintering of
Si-Si3N4 Compacts", Mat. Sci.
Eng., 71, 123-130 (1985). |
| 85-6kk |
Persson M,
Carlström E, Käll L and Kronberg B,
"Stabilization of SiC Slips Using
Polyethyleneimines", presented at the
"American Ceramic Society's 87th Annual
Meeting", Cincinnati (1985). |
| 85-7kk |
Nyberg B
och Pompe R, "Sintring av Si:Si3N4-pulverkroppar
med MgO och CaO som sintringshjälpmedel",
SILIKAT-RAPPORT 85-3 (1985). |
| 85-8kk |
Pompe R,
"Forskarvistelse i Japan vintern 1985",
SILIKAT-RAPPORT 85-4 (1985). |
| 85-9kk |
Lundberg R,
"Fiberkompositer med kerammatris - en
litteraturstudie", SILIKAT- RAPPORT 85-5 (1985). |
| 85-10kk |
Pompe R,
"On the R & D Work on High Performance Ceramics
in Sweden", SILIKAT-RAPPORT 85-6 (1985). |
| 85-11kk |
Williander
K, Persson M och Carlström E, "Organiska silaner
och titanater som tillsatsmedel vid formsprutning av
keramer", SILIKAT-RAPPORT 85-8 (1985). |
| 85-12kk |
Pompe R,
"Process for the production of mouldings from
materials based on silicon nitride", US Patent 4
492 665 (1985). |
| 85-13kk |
Carlström
E, Johnsson A, Hermansson L, "Method for Removal of
Organic Binding Agents from Molded Bodies", US
Patent 4 534 936 (1985). |
| 85-14kk |
Tjernlund
A-K och Pompe R, "Sätt vid framställning av
kiselnitrid-zirkoniumbaserade kompositmaterial", SE
8505988-9 (Svenskt Patent 1988). |
| 85-15kk |
Persson M,
"Formmaterial för gjutning av
konstruktionskeramer", SKS kurskompendium
"Gips och nya formmaterial", 6 sidor (1985). |
|
|
